- FAVORITES
-
- EXPLORE
-
-
-
-
-
-
-
- N/A
- Followed by 4 people
Change Language

Recent Updates
- Floating Platform Boat Pontoon Factory Introduces The Design Strategy Of Plastic Pontoons Floating Platform Boat Pontoon Factory Introduces Inflatable Floating Dock Plastic Pontoon has good weather resistance and impact resistance. It can withstand damage caused by wave impact, freezing, ship impact, etc., and is not corroded by petroleum, chemical agents, etc.; the surface of the cylinder adopts a mesh design, Non-slip, safe and stable, the four sides have high density and strong supporting force and can load 350kg per square meter. The surface of the cylinder adopts a mesh design, which is non-slip, safe, and stable, and the four sides have high density and strong support. It can work normally under the temperature of -60C to ≤80C, the installation is simple, flexible, and fast, does not consume manpower, shortens the construction time, and saves the cost. It can be configured with various required shapes. Plastic pontoons are light in weight, high in buoyancy, resistant to impact and corrosion, low in water absorption, simple and convenient in construction and maintenance, and can work normally for a long time between -60 degrees and 80 degrees. The floating body has a reasonable structure and performance. It is not corroded by seawater, chemicals, chemicals, oil stains, and aquatic organisms. It is corrosion-resistant and anti-freezing reinforced material. The above content is organized and shared by Floating Dock Plastic Pontoon Suppliers, hoping to help those in need. https://www.atboxingsandbag.com/Floating Platform Boat Pontoon Factory Introduces The Design Strategy Of Plastic Pontoons Floating Platform Boat Pontoon Factory Introduces Inflatable Floating Dock Plastic Pontoon has good weather resistance and impact resistance. It can withstand damage caused by wave impact, freezing, ship impact, etc., and is not corroded by petroleum, chemical agents, etc.; the surface of the cylinder adopts a mesh design, Non-slip, safe and stable, the four sides have high density and strong supporting force and can load 350kg per square meter. The surface of the cylinder adopts a mesh design, which is non-slip, safe, and stable, and the four sides have high density and strong support. It can work normally under the temperature of -60C to ≤80C, the installation is simple, flexible, and fast, does not consume manpower, shortens the construction time, and saves the cost. It can be configured with various required shapes. Plastic pontoons are light in weight, high in buoyancy, resistant to impact and corrosion, low in water absorption, simple and convenient in construction and maintenance, and can work normally for a long time between -60 degrees and 80 degrees. The floating body has a reasonable structure and performance. It is not corroded by seawater, chemicals, chemicals, oil stains, and aquatic organisms. It is corrosion-resistant and anti-freezing reinforced material. The above content is organized and shared by Floating Dock Plastic Pontoon Suppliers, hoping to help those in need. https://www.atboxingsandbag.com/WWW.ATBOXINGSANDBAG.COMFloating Pontoon Dock,Boxing Sandbag Manufacturing FactoryTaizhou anting is a professional China floating pontoon dock and boxing sandbag manufacturing factory. We provide reliable and complete products. Choose our products, you can carry out flexible collocation, bring value for money.0 Comments 0 SharesPlease log in to like, share and comment!
- Float Pontoon Factory Introduces The Installation Process Of Float-type Submersible Pumps Float Pontoon Factory introduces the installation method of the float-type submersible pump: the crane puts the pump in the water and fixes it on the shore with a rope to prevent it from drifting away. The water outlet is connected with a hose, which is butted with other pipes. 1. Design principle, instructions for use and use of floating bucket submersible pump Design principle of floating bucket submersible pump: Combine the submersible pump and the floating bucket to make the pump float on the water to pump water, which solves the problem of silt in puddles, pools, seasides, etc. The problem of inconvenient installation. Purpose and usage: It can be used for water intake in reservoirs, water pit drainage, Haihe river water intake and sump drainage, etc.; during installation, you only need to connect the floating water pump to the hose or steel pipe, and then drop into the water after the submersible cable is connected. In this way, the pump can float on the water to pump water. 2. Work flow: Casting process: Nodular cast iron is used in the selection of water pump castings. Due to the particularity of its material, the pump body is made of ductile iron, which increases the mechanical characterization of the pump. The water pump impeller has a large casting flow channel area, which is more resistant to pressure and more durable than welding. Balance test: The pump will go through a rigorous balance test before the parts are selected. Inspectors follow up the whole process and randomly select parts for sampling inspection Through the above introduction, Jet Ski Roller Dock Manufacturers hopes that you can simply refer to the content of this article in future use. https://www.atboxingsandbag.com/Float Pontoon Factory Introduces The Installation Process Of Float-type Submersible Pumps Float Pontoon Factory introduces the installation method of the float-type submersible pump: the crane puts the pump in the water and fixes it on the shore with a rope to prevent it from drifting away. The water outlet is connected with a hose, which is butted with other pipes. 1. Design principle, instructions for use and use of floating bucket submersible pump Design principle of floating bucket submersible pump: Combine the submersible pump and the floating bucket to make the pump float on the water to pump water, which solves the problem of silt in puddles, pools, seasides, etc. The problem of inconvenient installation. Purpose and usage: It can be used for water intake in reservoirs, water pit drainage, Haihe river water intake and sump drainage, etc.; during installation, you only need to connect the floating water pump to the hose or steel pipe, and then drop into the water after the submersible cable is connected. In this way, the pump can float on the water to pump water. 2. Work flow: Casting process: Nodular cast iron is used in the selection of water pump castings. Due to the particularity of its material, the pump body is made of ductile iron, which increases the mechanical characterization of the pump. The water pump impeller has a large casting flow channel area, which is more resistant to pressure and more durable than welding. Balance test: The pump will go through a rigorous balance test before the parts are selected. Inspectors follow up the whole process and randomly select parts for sampling inspection Through the above introduction, Jet Ski Roller Dock Manufacturers hopes that you can simply refer to the content of this article in future use. https://www.atboxingsandbag.com/WWW.ATBOXINGSANDBAG.COMFloating Pontoon Dock,Boxing Sandbag Manufacturing FactoryTaizhou anting is a professional China floating pontoon dock and boxing sandbag manufacturing factory. We provide reliable and complete products. Choose our products, you can carry out flexible collocation, bring value for money.0 Comments 0 Shares
- Float Pontoon Supplier Introduces The Knowledge Of The Use Of The Marina Float Pontoon Supplier introduced that the yacht dock can be divided into the aluminum alloy, steel structure yacht dock, barge yacht dock, combined yacht dock. Barge marina, this type of marina will be heard by very few people. The barge belongs to the rectangular flat-bottomed boat. It has no power plant itself, and it can be said that it can't be talked about sailing. It is often used to fix the ship based on the anchorage in the middle of the river. With the maturity of the barge, there are basically two materials for the barge pier to choose from, concrete structure or rigid structure. It can be used as Temporary docking points can also be used permanently. In fact, the marina has experienced the era of plastic, concrete, and steel structures. Nowadays, aluminum alloy yacht piers should become the next mainstream. Compared with the traditional yacht piers in the past, this new type of material yacht pier has obvious advantages. Its anti-corrosion ability is very good, and it is very good in transportation and installation. It is convenient and has very high endurance. Yachts made of this type of material can still be used for a long time, and they can be said to be prosperous. Some parts can be replaced by one replacement. Through the above introduction,Jet Ski Roller Dock Manufacturers hopes that you can simply refer to the content of this article in future use. https://www.atboxingsandbag.com/Float Pontoon Supplier Introduces The Knowledge Of The Use Of The Marina Float Pontoon Supplier introduced that the yacht dock can be divided into the aluminum alloy, steel structure yacht dock, barge yacht dock, combined yacht dock. Barge marina, this type of marina will be heard by very few people. The barge belongs to the rectangular flat-bottomed boat. It has no power plant itself, and it can be said that it can't be talked about sailing. It is often used to fix the ship based on the anchorage in the middle of the river. With the maturity of the barge, there are basically two materials for the barge pier to choose from, concrete structure or rigid structure. It can be used as Temporary docking points can also be used permanently. In fact, the marina has experienced the era of plastic, concrete, and steel structures. Nowadays, aluminum alloy yacht piers should become the next mainstream. Compared with the traditional yacht piers in the past, this new type of material yacht pier has obvious advantages. Its anti-corrosion ability is very good, and it is very good in transportation and installation. It is convenient and has very high endurance. Yachts made of this type of material can still be used for a long time, and they can be said to be prosperous. Some parts can be replaced by one replacement. Through the above introduction,Jet Ski Roller Dock Manufacturers hopes that you can simply refer to the content of this article in future use. https://www.atboxingsandbag.com/WWW.ATBOXINGSANDBAG.COMFloating Pontoon Dock,Boxing Sandbag Manufacturing FactoryTaizhou anting is a professional China floating pontoon dock and boxing sandbag manufacturing factory. We provide reliable and complete products. Choose our products, you can carry out flexible collocation, bring value for money.0 Comments 0 Shares
- Float Pontoon Factory Introduces The Use Of Floats Floating pontoon is an important water equipment, which changes in the process of water engineering application. With the continuous construction and development of domestic floating bridges, water piers, water houses, yacht piers and other water projects in recent years, water pontoons are important for water platform projects. Said is essential. Next, Float Pontoon Factory introduces what kind of functions the float can play on the water? The water buoy can expand the use area, and the water buoy has a strong load-bearing capacity on the water, which makes the water platform more convenient and simple, and also expands the area of ​​the water platform. Therefore, floating platform facilities are inseparable from buoys, which can be used in various water piers, yacht piers, and floating bridges. In addition, for houses closer to the shore, it is more convenient and safer to use water buoys to act as a bridge than to use a rowing boat to dock. Through the above introduction, China Jet Ski Roller Dock Company hopes that you can simply refer to the content of this article in future use. https://www.atboxingsandbag.com/Float Pontoon Factory Introduces The Use Of Floats Floating pontoon is an important water equipment, which changes in the process of water engineering application. With the continuous construction and development of domestic floating bridges, water piers, water houses, yacht piers and other water projects in recent years, water pontoons are important for water platform projects. Said is essential. Next, Float Pontoon Factory introduces what kind of functions the float can play on the water? The water buoy can expand the use area, and the water buoy has a strong load-bearing capacity on the water, which makes the water platform more convenient and simple, and also expands the area of ​​the water platform. Therefore, floating platform facilities are inseparable from buoys, which can be used in various water piers, yacht piers, and floating bridges. In addition, for houses closer to the shore, it is more convenient and safer to use water buoys to act as a bridge than to use a rowing boat to dock. Through the above introduction, China Jet Ski Roller Dock Company hopes that you can simply refer to the content of this article in future use. https://www.atboxingsandbag.com/WWW.ATBOXINGSANDBAG.COMFloating Pontoon Dock,Boxing Sandbag Manufacturing FactoryTaizhou anting is a professional China floating pontoon dock and boxing sandbag manufacturing factory. We provide reliable and complete products. Choose our products, you can carry out flexible collocation, bring value for money.0 Comments 0 Shares
- China Floating Dock Factory Introduces The Material Of Floating Dock China Floating Dock Factory introduces the basic characteristics of floating docks: 1. The service life of the floating wharf can be more than fifteen years. Except for the irresistible and unreasonable use of human factors in the ecological natural environment, there is almost no need for maintenance and repair costs. 2. Floating wharf has high load-bearing capacity, stable and durable cylinder, and high load-bearing capacity per square meter. 3. The upper surface of the float body of the floating wharf is designed with non-slip patterns, which is safe and secure; all four corners are arc-shaped obtuse angles to prevent the common risks of cement, wood, and iron facilities, such as slipping and being broken by wood chips. , Rust nail puncture, etc. 4. Floating docks are fully equipped, including mooring bolts, railings, anti-collision balls, anti-collision barrels and bolts, etc. The dock can moor various large and small ships; in addition, due to the buoyancy characteristics of the floating platform on the water, the dock can take off and land with the water level With automatic lifting, the safety and comfort of tourists getting on and off the boat is increased. 5. The floating wharf is reasonably cost-effective and economical. From a long-term point of view, it can save a lot of expenses and time for maintenance, maintenance, replacement, and overhaul. 6. The material of the floating dock is made of high-molecular-weight high-density polyethylene (HMWHDPE), which is an anti-corrosion, anti-freeze, anti-oxidation, and anti-purple line reinforced material, and will not be corroded by sea water, chemicals, chemicals, oil stains and aquatic organisms. It will not pollute the environment. 7. The floating dock is easy to assemble, fast, flexible, and has a variety of shapes. The overall selection of modular structure can meet the needs of various landscapes and quickly replace the platform shape; the appearance of bright colors and beautiful shapes makes the scenic spot icing on the cake and enhances the publicity effect; more Different architectural styles can be constructed with other materials (wood, steel) according to the different places and atmospheres. Through the above introduction, China Free Standing Boxing Bags Factory hopes that you can simply refer to the content of this article in future use. https://www.atboxingsandbag.com/China Floating Dock Factory Introduces The Material Of Floating Dock China Floating Dock Factory introduces the basic characteristics of floating docks: 1. The service life of the floating wharf can be more than fifteen years. Except for the irresistible and unreasonable use of human factors in the ecological natural environment, there is almost no need for maintenance and repair costs. 2. Floating wharf has high load-bearing capacity, stable and durable cylinder, and high load-bearing capacity per square meter. 3. The upper surface of the float body of the floating wharf is designed with non-slip patterns, which is safe and secure; all four corners are arc-shaped obtuse angles to prevent the common risks of cement, wood, and iron facilities, such as slipping and being broken by wood chips. , Rust nail puncture, etc. 4. Floating docks are fully equipped, including mooring bolts, railings, anti-collision balls, anti-collision barrels and bolts, etc. The dock can moor various large and small ships; in addition, due to the buoyancy characteristics of the floating platform on the water, the dock can take off and land with the water level With automatic lifting, the safety and comfort of tourists getting on and off the boat is increased. 5. The floating wharf is reasonably cost-effective and economical. From a long-term point of view, it can save a lot of expenses and time for maintenance, maintenance, replacement, and overhaul. 6. The material of the floating dock is made of high-molecular-weight high-density polyethylene (HMWHDPE), which is an anti-corrosion, anti-freeze, anti-oxidation, and anti-purple line reinforced material, and will not be corroded by sea water, chemicals, chemicals, oil stains and aquatic organisms. It will not pollute the environment. 7. The floating dock is easy to assemble, fast, flexible, and has a variety of shapes. The overall selection of modular structure can meet the needs of various landscapes and quickly replace the platform shape; the appearance of bright colors and beautiful shapes makes the scenic spot icing on the cake and enhances the publicity effect; more Different architectural styles can be constructed with other materials (wood, steel) according to the different places and atmospheres. Through the above introduction, China Free Standing Boxing Bags Factory hopes that you can simply refer to the content of this article in future use. https://www.atboxingsandbag.com/WWW.ATBOXINGSANDBAG.COMFloating Pontoon Dock,Boxing Sandbag Manufacturing FactoryTaizhou anting is a professional China floating pontoon dock and boxing sandbag manufacturing factory. We provide reliable and complete products. Choose our products, you can carry out flexible collocation, bring value for money.0 Comments 0 Shares
- Float Pontoon Manufacturers Introduces The Design Skills Of Floating Floats The floating pontoon is a combined floating module, which is mainly made of high molecular polyethylene through a blow molding process. It can be used wherever there is water. The water buoy has the characteristics of good impact resistance, corrosion resistance, reasonable price, stable performance, harmless, no maintenance, and any arbitrary assembly of any shape, and the water buoy also has the following values,Float Pontoon Manufacturers Introduces The Design Process Of Floating Floats: 1. The surface of the floating float adopts a non-slip surface design, which is safe and stable, and avoids all the common dangers caused by wooden facilities. 2. The floating pontoon can carry a weight of 375kg per square meter, which has super bearing capacity. 3. The service life can be as high as 20 years. 4. It has a wide range of uses and can be used in various fields. 5. Really 100% maintenance-free and economical. 6. It can be installed and dismantled quickly, and it is easy to install and dismantle. 7. Strong resistance, with anti-ultraviolet, anti-sea water, anti-freezing, chemical agents, oil stains and other substances. 8. It can be combined into facilities of any size and structure according to the needs of use, with super mobility. Through the above introduction, Jet Ski Roller Dock Manufacturers hopes that you can simply refer to the content of this article in future use. https://www.atboxingsandbag.com/Float Pontoon Manufacturers Introduces The Design Skills Of Floating Floats The floating pontoon is a combined floating module, which is mainly made of high molecular polyethylene through a blow molding process. It can be used wherever there is water. The water buoy has the characteristics of good impact resistance, corrosion resistance, reasonable price, stable performance, harmless, no maintenance, and any arbitrary assembly of any shape, and the water buoy also has the following values,Float Pontoon Manufacturers Introduces The Design Process Of Floating Floats: 1. The surface of the floating float adopts a non-slip surface design, which is safe and stable, and avoids all the common dangers caused by wooden facilities. 2. The floating pontoon can carry a weight of 375kg per square meter, which has super bearing capacity. 3. The service life can be as high as 20 years. 4. It has a wide range of uses and can be used in various fields. 5. Really 100% maintenance-free and economical. 6. It can be installed and dismantled quickly, and it is easy to install and dismantle. 7. Strong resistance, with anti-ultraviolet, anti-sea water, anti-freezing, chemical agents, oil stains and other substances. 8. It can be combined into facilities of any size and structure according to the needs of use, with super mobility. Through the above introduction, Jet Ski Roller Dock Manufacturers hopes that you can simply refer to the content of this article in future use. https://www.atboxingsandbag.com/WWW.ATBOXINGSANDBAG.COMFloating Pontoon Dock,Boxing Sandbag Manufacturing FactoryTaizhou anting is a professional China floating pontoon dock and boxing sandbag manufacturing factory. We provide reliable and complete products. Choose our products, you can carry out flexible collocation, bring value for money.0 Comments 0 Shares
- China Floating Dock Factory Introduces The Requirements For The Use Of Offshore Buoys China Floating Dock Factory introduces the use of offshore buoys: 1. The marine buoy is an unmanned automatic marine observation station. It is fixed in the designated sea area and fluctuates with waves like the beacons on both sides of the channel. Don't look at it in the sea, but its role is not Small, it can carry out long-term, continuous, and work in any harsh environment, regularly measure daily and report more than 10 hydrometeorological elements. 2. Marine buoy is a kind of unmanned, relatively highly automated technology, marine meteorological and hydrological observation and telemetry equipment. It can collect the basic marine hydrometeorological data required for deep-sea scientific research, offshore oil development, port construction and construction on a long-term and continuous basis in accordance with regulations. 3. Ocean buoy, which can measure the wind, air pressure, temperature, humidity, and visibility in the atmosphere, as well as the water temperature and salinity of waves and currents in the hydrological parameters, and can also measure water quality parameters including pH, dissolved oxygen, chlorophyll and even nutrients These parameters. The measurement range of the buoy is relatively wide. In addition, buoys are also widely used in science. Scientists want to understand the atmospheric circulation, the circulation in the ocean, and the ocean phenomena, all of which are inseparable from ocean buoys. Therefore, the demand for buoys in the ocean and offshore is very urgent. Through the above introduction, China Speed Stick Reflex Standing Bag Factory hopes that you can simply refer to the content of this article in future use. https://www.atboxingsandbag.com/China Floating Dock Factory Introduces The Requirements For The Use Of Offshore Buoys China Floating Dock Factory introduces the use of offshore buoys: 1. The marine buoy is an unmanned automatic marine observation station. It is fixed in the designated sea area and fluctuates with waves like the beacons on both sides of the channel. Don't look at it in the sea, but its role is not Small, it can carry out long-term, continuous, and work in any harsh environment, regularly measure daily and report more than 10 hydrometeorological elements. 2. Marine buoy is a kind of unmanned, relatively highly automated technology, marine meteorological and hydrological observation and telemetry equipment. It can collect the basic marine hydrometeorological data required for deep-sea scientific research, offshore oil development, port construction and construction on a long-term and continuous basis in accordance with regulations. 3. Ocean buoy, which can measure the wind, air pressure, temperature, humidity, and visibility in the atmosphere, as well as the water temperature and salinity of waves and currents in the hydrological parameters, and can also measure water quality parameters including pH, dissolved oxygen, chlorophyll and even nutrients These parameters. The measurement range of the buoy is relatively wide. In addition, buoys are also widely used in science. Scientists want to understand the atmospheric circulation, the circulation in the ocean, and the ocean phenomena, all of which are inseparable from ocean buoys. Therefore, the demand for buoys in the ocean and offshore is very urgent. Through the above introduction, China Speed Stick Reflex Standing Bag Factory hopes that you can simply refer to the content of this article in future use. https://www.atboxingsandbag.com/WWW.ATBOXINGSANDBAG.COMFloating Pontoon Dock,Boxing Sandbag Manufacturing FactoryTaizhou anting is a professional China floating pontoon dock and boxing sandbag manufacturing factory. We provide reliable and complete products. Choose our products, you can carry out flexible collocation, bring value for money.0 Comments 0 Shares
- Float Pontoon Factory Introduces The Characteristics Of Sandbags Float Pontoon Factory introduces the exercise method of sandbags: 1. Be prepared for activities, especially the hitting arm. It is better to play volleyball or basketball for a while before hitting the sandbag, in order to ventilate blood and move your muscles and bones. 2. Before the novice hits the sandbag, he should first move his body, especially the wrists and ankles. It is best to feel a slight heat and sweat all over the body. 3. Prepare a pair of boxing bandages, wrap your hands carefully until the wrist joints, and put on suitable practice gloves. 4. When hitting sandbags, follow the principle of gradual and orderly progress. The strength of the hits ranges from light to heavy, from slow to fast, and the technique ranges from a single technique to a combined technique. 5. Move your steps around the sandbag and your body sway. When hitting the sandbag, don’t use your whole body strength to make a heavy punch. Do one click, one click, no matter if it’s a jab, uppercut or a swing, don’t use excessive force. , Standardize your actions and experience the correct focus. 6. When punching, when the fist is about to touch the sandbag, the wrist joints must be tense, the fist must be clenched, and the fist face must be flat. When hitting the sandbag with wrestling and pumping hands, the shoulder, elbow, and wrist joints should be fully relaxed. Before practice, the joints of the fingers should be hot before they can be beaten, or they can be beaten lightly and punched with sandbags. After the fingers are warm, they can be beaten hard. 7. In the posture of making a fist, in addition to the face of the fist being flat, it is necessary to buckle slightly inside to make the fist and the forearm into one body, so that even if the fist is not fully clenched, it will not be bruised. In addition, the contact point is the fist peak and then the fist face. When touching the sandbag, do not change the angle of the fist and the forearm in order to make the fist face completely contact the sandbag. If the training intensity is high, it is recommended to use sandbag gloves (you can use ordinary ankle protectors instead, and put your thumbs through the holes in the middle of the ankle protectors). 8. When the inertia generated by the shaking of the sandbag hits you, you must not use your strength to hit a heavy punch, because your wrist strength is not enough to support the rebounding force, it is easy to cause damage to your wrist, correct The method is like this. When the sandbag rushes towards you, you try to dodge as much as possible. You can also use your forearm to block the sandbag, and then punch when the sandbag swings back. 9. Those who are beginning to practice or have minor wrist injuries can wear a wrist brace, but do not wear it for a long time. 10. Before sandbag training, in addition to the regular warm-up, you can alternately lightly hit the fist face 10 cm away from the sandbag to warm up the fist face before transferring to formal training. 11. You can properly let the sandbag hit your chest and abdomen to exercise your ability to resist hitting. Pay attention to muscle tension to avoid injury. Through the above introduction, China Speed Stick Reflex Standing Bag Factory hopes that you can simply refer to the content of this article in future use. https://www.atboxingsandbag.com/Float Pontoon Factory Introduces The Characteristics Of Sandbags Float Pontoon Factory introduces the exercise method of sandbags: 1. Be prepared for activities, especially the hitting arm. It is better to play volleyball or basketball for a while before hitting the sandbag, in order to ventilate blood and move your muscles and bones. 2. Before the novice hits the sandbag, he should first move his body, especially the wrists and ankles. It is best to feel a slight heat and sweat all over the body. 3. Prepare a pair of boxing bandages, wrap your hands carefully until the wrist joints, and put on suitable practice gloves. 4. When hitting sandbags, follow the principle of gradual and orderly progress. The strength of the hits ranges from light to heavy, from slow to fast, and the technique ranges from a single technique to a combined technique. 5. Move your steps around the sandbag and your body sway. When hitting the sandbag, don’t use your whole body strength to make a heavy punch. Do one click, one click, no matter if it’s a jab, uppercut or a swing, don’t use excessive force. , Standardize your actions and experience the correct focus. 6. When punching, when the fist is about to touch the sandbag, the wrist joints must be tense, the fist must be clenched, and the fist face must be flat. When hitting the sandbag with wrestling and pumping hands, the shoulder, elbow, and wrist joints should be fully relaxed. Before practice, the joints of the fingers should be hot before they can be beaten, or they can be beaten lightly and punched with sandbags. After the fingers are warm, they can be beaten hard. 7. In the posture of making a fist, in addition to the face of the fist being flat, it is necessary to buckle slightly inside to make the fist and the forearm into one body, so that even if the fist is not fully clenched, it will not be bruised. In addition, the contact point is the fist peak and then the fist face. When touching the sandbag, do not change the angle of the fist and the forearm in order to make the fist face completely contact the sandbag. If the training intensity is high, it is recommended to use sandbag gloves (you can use ordinary ankle protectors instead, and put your thumbs through the holes in the middle of the ankle protectors). 8. When the inertia generated by the shaking of the sandbag hits you, you must not use your strength to hit a heavy punch, because your wrist strength is not enough to support the rebounding force, it is easy to cause damage to your wrist, correct The method is like this. When the sandbag rushes towards you, you try to dodge as much as possible. You can also use your forearm to block the sandbag, and then punch when the sandbag swings back. 9. Those who are beginning to practice or have minor wrist injuries can wear a wrist brace, but do not wear it for a long time. 10. Before sandbag training, in addition to the regular warm-up, you can alternately lightly hit the fist face 10 cm away from the sandbag to warm up the fist face before transferring to formal training. 11. You can properly let the sandbag hit your chest and abdomen to exercise your ability to resist hitting. Pay attention to muscle tension to avoid injury. Through the above introduction, China Speed Stick Reflex Standing Bag Factory hopes that you can simply refer to the content of this article in future use. https://www.atboxingsandbag.com/WWW.ATBOXINGSANDBAG.COMFloating Pontoon Dock,Boxing Sandbag Manufacturing FactoryTaizhou anting is a professional China floating pontoon dock and boxing sandbag manufacturing factory. We provide reliable and complete products. Choose our products, you can carry out flexible collocation, bring value for money.0 Comments 0 Shares
- China Floating Dock Factory Introduces The Characteristics Of Floating Docks The pontoon wharf is a new type of ecological and environmentally friendly water supplies. For the water wharf, floating bridge, and water house, the production of the pontoon wharf is very important. The pontoon wharf can not only quickly establish a water service platform, but also lower the water The establishment cost of the service platform. Below, China Floating Dock Factory introduces the reasons for the price of the floating dock: 1. Specifications: Different specifications of buoys have very big differences in the price of water buoys. For buoys made of the same raw materials, the difference in specifications is basically the same as the difference in area. Therefore, when selecting specifications, decisions must be made based on the specific main purpose and application environment. 2. Material: Pontoon piers made of different raw materials have subtle differences in characteristics. If pontoon piers of different materials are used to produce pontoons, the differences in characteristics and quality will be very obvious. 3. Features: The application standards of pontoon docks are very common. Therefore, when the pontoon docks are manufactured, the performance of the pontoons will be determined according to the specific use environment of the pontoons. The floats with high-quality characteristics are more expensive in terms of price than those with general characteristics. Through the above introduction,Pu Cheap Boxing Equipment Manufacturer hopes that you can simply refer to the content of this article in future use. https://www.atboxingsandbag.com/China Floating Dock Factory Introduces The Characteristics Of Floating Docks The pontoon wharf is a new type of ecological and environmentally friendly water supplies. For the water wharf, floating bridge, and water house, the production of the pontoon wharf is very important. The pontoon wharf can not only quickly establish a water service platform, but also lower the water The establishment cost of the service platform. Below, China Floating Dock Factory introduces the reasons for the price of the floating dock: 1. Specifications: Different specifications of buoys have very big differences in the price of water buoys. For buoys made of the same raw materials, the difference in specifications is basically the same as the difference in area. Therefore, when selecting specifications, decisions must be made based on the specific main purpose and application environment. 2. Material: Pontoon piers made of different raw materials have subtle differences in characteristics. If pontoon piers of different materials are used to produce pontoons, the differences in characteristics and quality will be very obvious. 3. Features: The application standards of pontoon docks are very common. Therefore, when the pontoon docks are manufactured, the performance of the pontoons will be determined according to the specific use environment of the pontoons. The floats with high-quality characteristics are more expensive in terms of price than those with general characteristics. Through the above introduction,Pu Cheap Boxing Equipment Manufacturer hopes that you can simply refer to the content of this article in future use. https://www.atboxingsandbag.com/WWW.ATBOXINGSANDBAG.COMFloating Pontoon Dock,Boxing Sandbag Manufacturing FactoryTaizhou anting is a professional China floating pontoon dock and boxing sandbag manufacturing factory. We provide reliable and complete products. Choose our products, you can carry out flexible collocation, bring value for money.0 Comments 0 Shares
- China Floating Dock Factory Introduces The Use Characteristics Of Boxing Sandbags Training with a boxing punching bag is a great way to get rid of stress and release stress. Punching the sandbag is also a simple method of cardiovascular exercise. Below,China Floating Dock Factory introduces the types of boxing punching bags: 1. The straight punching bag is a bag stuffed with leather or vinyl. Although it looks simple, due to its many fitness effects, this sandbag has become a cross-training tool. For boxing and martial arts, straight boxing punching bags are used to increase the strength of blows and help practice movement and combination techniques. From a pure fitness point of view, three minutes of weight training can give you cardiovascular exercise. 2. The speed bag is one of the most versatile training tools for boxing. The speed bag is usually hung on a raised platform, sometimes between two cables. In a boxing match, you hit the speed bag with your fist. You can hit the speed bag with your fist and elbow. Practicing with a speed bag can improve your accuracy and greatly increase your reaction time. The purpose of practicing this type of sandbag is to build cardiovascular and muscular endurance while increasing speed and improving hitting skills. 3. The independent boxing sandbag has a heavy base filled with sand or water, and a leather or vinyl top, which is very similar to a straight sandbag in density and appearance. Some independent sandbags even have an upper part in the shape of a head and torso. The purpose of this training tool is to place an opponent-sized replica in front of the fighter. You mainly build momentum and muscle endurance. You also have the ability to move 360 ??degrees around the heavy base of the sandbag, allowing you to train a wider range of shot angles and combinations. 4. Fighting sandbag is a new type of fighting fitness training tool. The fighting bag is a long and heavy bag. One function of the fighting bag is to train endurance and endurance when you cross the torso to different positions on the ground. A fighting sandbag allows you to train hammer, elbow, and body strike techniques. The weight of these bags ranges from 50 pounds to 100 pounds, so throwing them around the gym will also generate grip and core strength. Through the above introduction, China Speed Stick Reflex Standing Bag Factory hopes that you can simply refer to the content of this article in future use. https://www.atboxingsandbag.com/China Floating Dock Factory Introduces The Use Characteristics Of Boxing Sandbags Training with a boxing punching bag is a great way to get rid of stress and release stress. Punching the sandbag is also a simple method of cardiovascular exercise. Below,China Floating Dock Factory introduces the types of boxing punching bags: 1. The straight punching bag is a bag stuffed with leather or vinyl. Although it looks simple, due to its many fitness effects, this sandbag has become a cross-training tool. For boxing and martial arts, straight boxing punching bags are used to increase the strength of blows and help practice movement and combination techniques. From a pure fitness point of view, three minutes of weight training can give you cardiovascular exercise. 2. The speed bag is one of the most versatile training tools for boxing. The speed bag is usually hung on a raised platform, sometimes between two cables. In a boxing match, you hit the speed bag with your fist. You can hit the speed bag with your fist and elbow. Practicing with a speed bag can improve your accuracy and greatly increase your reaction time. The purpose of practicing this type of sandbag is to build cardiovascular and muscular endurance while increasing speed and improving hitting skills. 3. The independent boxing sandbag has a heavy base filled with sand or water, and a leather or vinyl top, which is very similar to a straight sandbag in density and appearance. Some independent sandbags even have an upper part in the shape of a head and torso. The purpose of this training tool is to place an opponent-sized replica in front of the fighter. You mainly build momentum and muscle endurance. You also have the ability to move 360 ??degrees around the heavy base of the sandbag, allowing you to train a wider range of shot angles and combinations. 4. Fighting sandbag is a new type of fighting fitness training tool. The fighting bag is a long and heavy bag. One function of the fighting bag is to train endurance and endurance when you cross the torso to different positions on the ground. A fighting sandbag allows you to train hammer, elbow, and body strike techniques. The weight of these bags ranges from 50 pounds to 100 pounds, so throwing them around the gym will also generate grip and core strength. Through the above introduction, China Speed Stick Reflex Standing Bag Factory hopes that you can simply refer to the content of this article in future use. https://www.atboxingsandbag.com/WWW.ATBOXINGSANDBAG.COMFloating Pontoon Dock,Boxing Sandbag Manufacturing FactoryTaizhou anting is a professional China floating pontoon dock and boxing sandbag manufacturing factory. We provide reliable and complete products. Choose our products, you can carry out flexible collocation, bring value for money.0 Comments 0 Shares
More Stories