Bed Elevator Manufacturers Introduces The Size Specifications Of Micro Elevators For ordinary people, after settled in a single-family villa, the home micro-elevator seems to be very important. If an elevator that can carry 4 to 5 people is to be installed, how should the size of the elevator shaft be reserved? There are relevant standards on the surface of the reserved size, but in the case of actual selection, try to compare it and see what size is more suitable. In addition, different brands have different specifications and model sizes according to the applied brand. In addition, elevator cars with different drives have different specifications, models, and sizes. Bed Elevator Manufacturers introduces the size specifications of home miniature elevators. 1. Classification of household mini elevators Different types of home micro elevators have different structures, and the structure also determines the size. And what kind of elevator to choose, different equipment, size also has a very large selection space. In terms of specific classification, it can be divided into hydraulic elevators, machine-room-less traction elevators, and imported air-cooled elevators. Generally, the elevator structure consists of elevator shafts and pits, hydraulic lifting platforms or elevator cars, landing stations, etc. The larger the landing station, the higher the aspect ratio of the size. 2. Air-cooled elevator size Different brands of screw elevators have different specifications, models and sizes. The smallest size can guarantee 1 square meter, and a compact and exquisite elevator car occupies an area of ​​100mm*900mm. The minimum size of the high-rise is 2200Mm, and there is no bottom hole. Compared with hydraulic type and machine-roomless traction type, the fully imported screw elevator has better functions, appearance and technology. According to the requirements of the community owners, the elevator car can be put into the home without laser cutting the indoor stairs. 3. Dimensions of hydraulic household miniature elevators Both hydraulic elevators and screw elevators are relatively small, and hydraulic elevators have the characteristics of high elevator shaft utilization. The minimum size of hydraulic type household micro elevator can guarantee about 1200Mm*1200Mm (integrated structure). This varies according to the model and specifications of the elevator car provided by the manufacturer. The size and load-bearing capacity of hydraulic elevators of different models and specifications are different. The minimum size of the hydraulic household miniature elevator commonly seen by the Suzhou Franz editor has a load-bearing capacity of 255kg, an internal size of 800*950mm, and a space requirement of 900*100mm. Through the above introduction, Escalator Supplier hopes that you can simply refer to the content of this article in future use. https://www.fujihsed.com/