Are your Lavatory Cabinet maintenance still on the surface? The maintenance of Lavatory Cabinet can't just stay on the surface. Many other places need to be maintained. The following is a detailed introduction.

1. Clean the cabinet surface

Dust: Pay attention to keeping the surface clean every day. When there is dust, you should use a duster or a soft cloth to remove the dust. You should also avoid the dirt from touching the cabinet.
Water mark: Usually it will disappear by itself after a period of time. If it still does not fade after a long time, use a clean cotton cloth coated with a small amount of salad oil to wipe along the direction of the wood grain.
Food stains: All kinds of tea stains, fruit juices, butter, etc. will leave slight stains on the surface, wipe them off immediately, and then use a clean soft cloth to polish the stains.
Ink marks: Can be wiped with a soft rubber. To prevent discoloration, a few drops of water can be placed on the stains. The cleaned surface can be maintained with professional maintenance agents or emollient oils.

2. Clean inside the cabinet

Dust: Dust is usually hidden near where the wardrobe door opens and at the four corners of the cabinet. Clean everything, use a small brush to gently sweep the dust out of the closet, and then wipe it off with a dry towel along the gap of the cabinet.
Molds: In wet weather, closets are prone to molds. If molds are found, you must not only clean them with a cloth, but also apply varnish on them. We can also use petroleum jelly to clean, and then wipe clean with a clean cloth.

3. Clean the cabinet hardware
Handle: Use a soft cloth dipped in a little toothpaste and wipe it slowly and repeatedly, the handle will restore smoothness. Toothpaste contains abrasives and has a strong detergency.
Guide rail: To deal with the dust in the guide rail, first use a small brush to sweep the dust along the guide rail to the side, and then use a vacuum cleaner to suck the dust out, and then wipe the guide rail with a dry soft cloth.
Hinge: Wipe gently with a soft dry cloth. Do not use chemical cleaners or acidic liquids. If black spots on the surface are difficult to remove, wipe with a little kerosene.
Tops: The tops will stick a lot of dust over time. Therefore, the tops should be cleaned frequently. Some tops are fixed on the cabinet door with glue, which is difficult to clean. If necessary, you can find a professional to replace the tops.

The above content is shared and organized by the Stainless Steel Faucets manufacturer, hoping to help those in need.