Freres Wood Co. Inc. is utilizing a 22, 500-lb. (11. 25-ton) volume Caldwell Posi-Turner to turn loads at its Size Plywood Panels facility inside Lyons, Oregon.

The Posi-Turner, which is designed to rotate bulky and hard to deal with objects during manufacture as well as assembly processes, is operated beneath the hook of any 15-ton capacity overhead crane to flip panels inside lumber and timber company’s a finish area.
The 180, 000 sq. ft. facility (one of several Oregon locations) is serviced simply by seven overhead cranes, ranging in capacity from 5 VARIOUS tons to 15 lots, all provided by U. S. Crane & Hoist, as well of Oregon. Some of them are fitted with a pair of hoists and tandem lifts are commonplace along at the world’s first veneer-based size timber production facility.

Kyle Freres, vice chief executive of operations at Freres Lumber, said: “We needed the potential to flip panels and the Posi-Turner is a fantastic fit. I even saw one among our employees flipping some sort of unit of plywood lately, which just shows how flexible the item is. It is used sporadically determined by the job and many experts have very efficient. The straps are easy to sleep and the unit is easy to operate. I don’t believe you'll find had to do just about any maintenance, other than replacing damaged straps. ”

He / she added: “Typically our cells weigh about 37 lbs. / cubic foot. The largest we have picked with all the Posi-Turner, and oriented upright onto a drop-deck trailer, was 12 in. thick, 12 ft. wide, as well as 48 ft. long—and weighed a little over 10 tons. ”

The Posi-Turner represented a large cost saving versus another solution mechanical solution and operates in the middle of the Mass Plywood Panels operation. As Freres explained, commercial timber construction may be a growing industry in your U. S. due to its sustainability and ability to become pre-manufactured, which can cut construction costs and significantly reduce labor.

The capability produces panels in 8-10 ft.,10 ft.,and also 12 ft. widths, as long as 48 ft. long, with thicknesses ranging approximately 24 in. Almost all products current a requirement for customized computer numerical control (CNC) work as a way to reduce labor on the career site, meaning practically that the company—and the Posi-Turner—handle many product dimensions.

Freres stated: “We move product from our conveying system simply by crane to our CNC outside patio's, and then off yet again when work is finish. We handle them again within the finishing area for numerous activities including painting, bond of pick points, along with other tags. We also flip many panels subject to the requirements of the job. ”

Recently the firm produced a mat product or service with two half-lap edges on each item. The Posi-Turner was helpful to flip every other panel to feature pick points on alternating sides so the half-laps would fit together properly if your pieces were laid lower.

Freres continued: “We take what appears to be a standard sheet involving plywood—but isn’t—and scarf it proper long product called structural amalgamated lumber. We use [4 foot. - and 2 ft. -wide"> billets to construct larger panels on the appropriate size required with the project. Those pieces are delivered to a [CNC"> machine that they are finished. From there the panels are sent to finishing for any last touches and they are then shipped to the career site. ”.
https://www.plywood-machine.com/Plywood-Veneer-Production-Line-pl3750996.html 201911ld