ISO 9001 Certification in Bangalore will think that corrective and the preventive actions are a waste of time, or something that is only useful to the showcase for the registrar? I have found that many of the companies are struggle with the implementing an effective corrective action systems, but here are some ideas on how you can use these tools more effectively in your company.

Correction vs. Corrective action in ISO 9001

ISO 9001 Consulting Services in Saudi Arabia One of the biggest difficulties will be understanding in the difference between “correction” and the “corrective action.” Correction is when you find a problem and then you fix the immediate problem, such as changing the oil in a machine that has to run out and is making bad parts, while corrective action may goes deeper and finds the underlying root cause of the problem and fixes that root cause.

ISO 9001 Consultant in Bangalore should needs a correction to solve a every problem, the best bang for the buck is to use corrective the actions on the bigger problems that are repetitive and recurring.  If a problem has only surfaced once, then performing and documenting a seven-step corrective action process will be too expensive, but if it occurs several times a month an investigation and corrective action will likely save money in the long run, since time will be saved when fewer problems may occur.

Process for ISO corrective action

ISO 9001 Certification services in Saudi Arabia have been found that there are a few simple steps that we all go through, subconsciously, when we are trying to solve a difficult the problem, and these work is well when it is properly documented as a Corrective Action system in an ISO 9001 company.  There are many ways to document these, from the fancy computer programs to simple paper or PDF forms, but the  steps all seem to be follow in the same flow.

1) Define the problem. First, make sure the problem is, in fact, a real problem, and may not perceived problem.  A good test is if you can write an problem with a requirement to compare, what is often called a “Should Be” and “Is” statement.  If you cannot say what the outcome should be expected to be, then you may not have identified a real problem.

2) Define the scope. Make sure that you understand how big the problem to be addressed is it just today’s product, or was yesterday’s product was affected too? If the problem only happens on Wednesday, this may be important information.

3) Containment Actions. Make a correction to stop for the right now while you look for the ultimate cause and fix that.  Basically, what immediate checks or stop gap measures are you putting in the place to make sure that we will definitely catch the problem and again if it recurs while you are fixing it.


4) Find the Root Cause. This is the trickiest part.  How do you make sure you have to found the underlying the issue? There are many different ways to do this, from asking whole training courses have been dedicated to this topic, but suffice it to say that you want to try to identify the underlying an problem

5) Plan a Corrective Action. Decide what are the steps needed to be eliminate the root cause of the rised problem.  Here, depending on the problem, you will need to be identify the cost and return on the investment.

6) Implement the Corrective Action. This is as simple as the following through on your plan and making it happen.  It could be as simple as the implementing the preventive of the maintenance program already has been described, or buying and can be installing a new piece of the equipment because the old one could have no longer  keep the accuracy you need.

7) Follow up to make sure the Plan worked. Simply put, after you have made your updates, wait a suitable amount of time and then make sure with it then the problem does not recur.  If it does, you need to have a question if you got the actual root cause.  This is the most important step, but also the most companies have trouble with it.

Our advice, Go for it

ISO 9001 Certification in Saudi Arabia helps companies to increase the guarantee on return on investment.  Saudi Arabia is one the developed country located in gulf region with Riyadh city as the capital of the country which is one of largest city across the country.