Portable air compressors have become an important thing in this era, including the use of simply inflating football and tires, inflating cylinders, and powering pneumatic tools such as wind guns, grinders, wrenches and paint sprayers.

It is very easy to operate these compressors, but in order to maintain their safety and durability, there are several steps that must be followed when using this equipment. With proper operation and maintenance, the machine will work more efficiently and have a longer life.

So what is the effective procedure for operating a portable air compressor? This system guide will teach you how to use this basic tool correctly for great results.

1. 
   Set up the air compressor
   The assembly process of an air compressor is usually different depending on the manufacturer/model. The machine's user manual usually contains instructions to guide you through the proper setup of the machine. This is the first and most important step to ensure that the correct connection does not cause any damage. One setup procedure that should be performed on all models is to connect the compressor hose to the regulator valve of the machine.
2. Check the oil and fuel level
   Checking the oil level is a standard procedure whenever using this type of machine. Oil is a substance that lubricates and cools the engine, so running a low-oil air compressor can cause the engine to crash, which is difficult to repair and most warranties are not included. If the oil level is below the fill line, it must be topped up and if used for a long time, the oil must be replaced as described in the video below. You also need to check for oil leaks and close the responsible outlet to avoid confusion and reduce machine efficiency.

You must also check the amount of fuel to ensure that the machine can run for a long time. This prevents unnecessary interruptions between chores to replenish fuel.

The most common sources of power in air compressors include natural gas, diesel and electricity, with differences in efficiency, cost, eco-friendliness and ease of use.

3. Close all exhaust valves
   To ensure that the air remains intact during compression, it is important to close all exhaust valves. This prevents air leakage to keep the pressure difference of the compressed air constant. Depending on the machine's user manual, you must ensure that the different valves are set correctly before proceeding to the next step.
4. Start the engine
   Compressor If the portable air compressor is electrically powered, connect its cable to the nearest power outlet and turn it on. If it is not electric, make sure the fuel is sufficient and then turn it on again.

This will start the engine and its speed will gradually increase until it reaches its highest level. You should then allow the compressor to warm up for a few minutes before starting to compress the air entering its tank/cylinder until the maximum pressure is reached. You will then close the tank drain valve to prevent air from escaping and allow it to cool for a while before stopping the engine.

5. Use it on power tools
   You can finally use it to drive your tools.

Portable compressors can be used to fill cylinders, provide clean air to divers, drive pneumatic HVAC units, power pneumatic tools such as jackhammers, and power industrial processes such as petroleum oxidation. Smaller portable air compressors can actually be used to power the car.

maintenance
Below is a list of some of the most important maintenance procedures you should perform when you want to use a portable air compressor.

Check for air and oil leaks and seal or repair.
Check the condition of the air filters and clean or replace them.
Replace whenever the oil gets old.
Keep engine oil and fuel levels at the desired level.
Verify the safe temperature of the air compressor operation to avoid overheating.
Inspect the body of the machine for dents or breakage and repair or replace parts.
These are just a few of the aspects that should be noted when owning or using an air compressor. For more maintenance procedures, you will need to check the user or maintenance manual for the device for instructions.

Each portable air compressor model has a different structural and functional design and each operation can be completely different.

Linsheng    is a professional   Air Compressor Manufacturers    and    Air Compressor Suppliers    in China. We treat our customers with the most positive attitude. The answer is the most professional and reasonable offer. For new products, we will listen to our customers and provide useful advice to ensure we produce the best products. Https://www.linsheng.com